Duerkopp Adler 911 Fitting Instructions Manual page 13

3.4 Preparing the face cover
Ausgabe/Edition: Änderungsindex
05.2010 Rev. index: 00.0
Anbauanleitung für Laserleuchte
Teilesatz 0911 597524
Fitting Instruction for laser lamp
Kit 0911 597524
1
The kit does not include a new face cover.
Two new holes need to be drilled into the existing face cover.
To this end see the drawing on page 8.
– Unscrew the face cover 1.
– Drill the holes 2 according to the drawing into the face cover.
Printed in Germany
Teile-Nr./ Part-No.:
0791 911701
2
Blatt: von
Sheet: 13 from 16