Multi-Unit Installations; Programming Reference & Factory Defaults - Linear ACCESS AE-100 Guide Facility Manager’s Manual

Programming Reference & Factory Defaults
STANDARD ALTERNATE
PROGRAMMING FUNCTION
POSITION CODE
NUMBER NUMBER
99 91
38 38
51 72
52 71
57 10
61 74
62 75
63 76
64 70
77 77
95 95
21 01
22 02
23 03
31 31
33 33
30 30
34 34
80 05
81 05
83 05
92 04
93 93

Multi-unit Installations

Up to four AE-100 units may be connected to the same dedicated
telephone line to form a simple network. Connecting multiple units allows
transferring programming data (either the directory entries only or the
entire memory's contents) from the "master" unit to the other sub-units.
In multi-unit installations each AE-100 must be assigned a unique unit
number before programming. The unit number allows connecting to a
specifi c unit when calling for programming and identifi es the other units
to the master unit. One unit must be assigned as "Master Unit #1".
Pre-set Unit Numbers
Your access control installation company has already programmed this
system. If this is a multiple unit installation, the sub-unit numbers have
been set in the sub-units, and the master unit was also programmed to
recognize those numbers.
6
FUNCTION OF PROGRAMMING STEP
EXIT PROGRAM MODE
SYSTEM OPTIONS
SYSTEM DISPLAY LANGUAGE
KEYPAD LOCKOUT COUNT
ACCESS RELAY ACTIVATION TIME
WELCOME DISPLAY TEXT
AUTOMATIC TELEPHONE ANSWER
SPEAKER CHIRP ON KEYSTROKES
SPEAKER TONE ON ACCESS RELAY ACTIVATION
MAXIMUM VISITOR TALK TIME
RESIDENT CONTROL OF ACCESS RELAY
RESIDENT CALL-BACK
ACCESS DATA CONTROL
ADD A DIRECTORY ENTRY FOR A RESIDENT
MODIFY AN EXISTING DIRECTORY ENTRY
DELETE AN EXISTING DIRECTORY ENTRY
ADD A STAND-ALONE ENTRY CODE
DELETE A STAND-ALONE ENTRY CODE
SYSTEM UTILITIES
COPY ACCESS DATA ONLY FROM MASTER TO SUB-UNITS
COPY ALL DATA FROM MASTER TO SUB-UNITS
TIMED ACCESS RELAY LATCH
LATCH ACCESS RELAY
RELEASE ACCESS RELAY
DELETE ALL RESIDENT DATA
DELETE ALL STAND-ALONE ENTRY CODES
The unit numbers and locations for this installation are:
UNIT # UNIT TYPE
1 MASTER UNIT
2 SUB-UNIT
3 SUB-UNIT
4 SUB-UNIT
FACTORY
DEFAULT
VALUE
ENGLISH
3 TRIES
4 SECONDS
LINEAR
ACCESS
TELEPHONE
ENTRY
ON
ON
ON
60 SECONDS
ON
OFF
UNIT LOCATION