Audio operations
Using the Radio
■ Auto Station Memory (ASM)
IMPORTANT
● You can select a station by simply touching
a preset switch (any of [1] to [6]). The
frequency of the selected station is
displayed.
● When you save a new station in memory,
the existing station is cleared instead.
● If you can tune less than six stations, the
remaining stations are kept in memory.
1
Touch
Preferences
2
Touch
ASM
● The automatic station selection will start
with a beep sound. A search will be
conducted from the lowest frequency
through progressively higher frequencies
and stations with strong reception will be
memorized for preset registration numbers
[1] to [6]. The registration procedure has
been completed, a beep sounds twice and
the station memorized last (i.e. the one
memorized for P6) will continue to be
received. Subsequently, when you listen to
the radio you will be able to select stations
by calling up preset numbers.
To stop ASM, touch
36
36
.
.
.
Preset Scan
This function enables reception of all the
stations in the preset switches to be played
for five seconds each.
1
Touch
Preferences
2
Touch
Preset SCAN
● The stations of preset switches P1 to P6
will be scanned sequentially. Each station
is turned for five seconds.
To
cancel
the
.
Stop SCAN
Showing the current
frequency on the sub-
display
The frequency can be displayed on the LCD
when the PND is connected.
1
Press the [TEXT] button.
.
.
preset
scan,
touch