Table of Contents
Advertisement
2.12.8
Zero point of cutter
3-28
Instruction and inspection
When the material clamp is inserted, the blades of the edge cutter 1
must point towards the material clamp.
–
Switch on sewing machine.
–
Press "OK".
The reference run is carried out.
The edge cutter is moved to its initial position.
–
Check the position of the blades edges.
Adjustment
–
Press and hold "F3" function key.
–
Switch on main switch.
The setting programmes are called.
–
Select setting programme "303" by means of the "
–
Press "OK".
The edge cutter is moved to its initial position.
–
Press the " " or "" key.
The zero position is moved in the selected direction.
The last three digits of the display show its distance from the initial
position.
Adjust the zero position in such a way that the edge cutter is
pointing straight ahead.
–
Press "OK".
The new position is saved.
–
Press "ESC".
The system returns to the programme for basic settings (300).
1
" or "
" key.
Advertisement
Table of Contents
