Table of Contents
Advertisement
3-38
Adjustment of setting
–
To select a direction, press the corresponding key.
Key "1": X position
Key "2": Y position
Example: Change of X position
–
Press key "3".
Press " " or "" key.
The needle position is moved in the selected direction and relative
to the material clamp in steps of 1/10 mm .
The last three digits of the display indicate the distance
from the initial position.
Or
–
Press key "4".
Press " " or "" key.
The needle position is moved in the selected direction and relative
to the material clamp in steps of 5/10 mm .
The last three digits of the display indicate the distance
from the initial position.
–
Press "OK".
The new position is saved.
–
Press "ESC".
The system returns to the programme for basic settings (300).
–
Re-install sewing foot and blades.
Advertisement
Table of Contents
