Table of Contents
Advertisement
9.7
Buttonhole sequence
9.7.1
Selecting a buttonhole sequence
9.7.2
Changing the buttonhole sequence
30
The 589 controller can be programmed with up to 25 sequences of
buttonhole shapes. Each sequence can contain up to 5 buttonholes.
–
Press "S".
The controller switches to the buttonhole-sequence programming
menu.
–
To program or alter a buttonhole shape press "P".
–
To leave this menu press the "ESC" key.
–
The number of the selected sequence is displayed behind this
symbol.
The sequence belonging to the sequence number is displayed in
the line below.
–
To switch to another sequence select the top menu line.
–
Press the enter key.
Use the ñ and ò cursor keys to select a different sequence.
–
–
When a new sequence is created a "*" appears before the
sequence number (setting for buttonhole shape of sequence: 1)
Appending a buttonhole
Use the ñ and ò cursor keys to select a buttonhole sequence.
–
–
Press the enter key.
Within the buttonhole sequence use the ð cursor key to select the
–
point behind the last buttonhole.
"0" appears as the buttonhole shape.
Use the ñ and ò cursor keys to select the number of the required
–
buttonhole shape.
Deleting a buttonhole
Use the ñ and ò cursor keys to select a buttonhole sequence.
–
–
Press the enter key.
Within the buttonhole sequence use the ï and ð cursor keys to
–
select the buttonhole to be deleted.
Use the ñ and ò cursor keys to set buttonhole shape "0".
–
–
Press the enter key.
The selected buttonhole is deleted. Any subsequent buttonholes
move up one place.
Advertisement
Table of Contents
