Canon LR1 User Manual page 11

Do not use the power cord if it is tied or knotted.
Doing so may result in fire or electrical shock.
If you notice smoke or any strange odor coming from
your printer, immediately turn off the power and
unplug the power cord from the power outlet.
Continuing to use the printer under these conditions
may cause fire or electrical shock. Contact the Canon
Customer Care Center.
When removing the power cord, make sure you pull on
the plug, and not on the cord.
Pulling on the cord can damage it, possibly resulting in
fire or electrical shock.
Do not place any object next to the power outlet that
would prevent you from pulling out the power cord.
In emergencies, fire or electrical shock could result if you
are unable to pull out the plug quickly.
The printer is designed for use with AC 120 V.
Using it with any other voltage can result in fire or
electrical shock. Please use with a power source that
meets these conditions:
Voltage: AC 120 V
Frequency: 60 Hz
1-4
Introduction
Chapter 1