Subscribe to Our Youtube Channel
Related Manuals for Turbosound Milan Mi0
Summary of Contents for Turbosound Milan Mi0
-
Page 1: User Guide
USER GUIDE Turbosound Ltd Star Road, Partridge Green West Sussex RH13 8RY United Kingdom Tel: +44 (0)1403 711447 Fax: +44 (0)1403 710155 web: www.turbosound.com Issue 1.0 © Turbosound Ltd... -
Page 2: Table Of Contents
Using the M10 rigging points ..........................20 Wall Mounting ..............................20 Troubleshooting ............................21 Product Dimensions ..........................22 Milan Mi0................................22 Technical Specifications ......................... 23 Spare Parts ............................... 24 Accessories ................................24 MILAN Mi0 user manual Page 2... - Page 3 MILAN Mi0 Warranty ..............................25 Contact Information ..........................26 Customer Service ..............................26 Product Information ............................... 26 Notes ....................... Error! Bookmark not defined. MILAN Mi0 user manual Page 3...
-
Page 4: Ec Declaration Of Conformity
MILAN Mi0 EC Declaration of Conformity Manufacturer Turbosound Ltd, Star Road, Partridge Green, West Sussex, RH13 8RY, UK tel: +44 (0)1403 711447 fax: +44 (0)1403 710155 www.turbosound.com Standards This product complies with directive 89/336/EEC (EMC) and following modifications 92/31/EEC and 93/68/EEC, as stated in EN 55103-1 and EN 55103-2 and with directive 73/23/EEC (LVD) and following modifications 93/68/EEC as stated in EN 60065 standard. -
Page 5: Safety Considerations
Use only accessories and attachments approved by the manufacturer. If the product is to be permanently installed use only rigging hardware approved by Turbosound. Unplug the loudspeaker during lightning storms or when it is not to be used for long periods of time. -
Page 6: Introduction
By engaging in an on-going rigorous program of research and development all TURBOSOUND products are carefully engineered for world class performance and reliability. If you would like further information about this or any other TURBOSOUND product, please contact us. Detailed product information is available on our website at: www.turbosound.com We look forward to helping you in the near future. -
Page 7: Getting Started
The SIG/LIMIT LED illuminates green to indicate signal present and flashes red when limiting. It is normal for the SIG/LIMIT LED to flash occasionally, but excessive or prolonged illumination indicates that the input signal is too high or additional speakers are required. MILAN Mi0 user manual Page 7... -
Page 8: User Manual
MILAN Mi0 When shutting down the Milan system, first turn down the input level controls, then switch off the mains power before turning off the mixer or signal source. MILAN Mi0 user manual Page 8... -
Page 9: Self-Powered Loudspeakers
If you are using Milan as part of a larger multi-channel monitor system and where drums may be part of the monitor mix, it is recommended that kick drum EQ is used sparingly and carefully. MILAN Mi0 user manual Page 9... -
Page 10: Model Information
Lifting and carrying is made easy with the provision of a comfortable scoop handle on the top of the cabinet. The Mi0 cabinet provides M10 rigging points on the top and bottom for suspending horizontally or vertically in permanent installs. MILAN Mi0 user manual Page 10... -
Page 11: Milan Mi0 Features
Durable, stylish and lightweight moulded composite enclosure Internal M10 rigging points on top and bottom for easy suspension in permanent installs Attractive powder coated and galvanised perforated steel grille MILAN Mi0 user manual Page 11... -
Page 12: Connector Wiring
Some sources such as mp3 players or CD players commonly provide 2-pole unbalanced phono connectors, and these can be connected to the Milan line input channel via either the XLR connector or jack connector. In either case wire the connectors as follows: 1 (ground) sleeve sleeve sleeve MILAN Mi0 user manual Page 12... -
Page 13: Connecting To The Milan Mi0
The mic input is not suitable for condenser microphones that require phantom power. The input is balanced to avoid hum loops and RF interference, and is wired pin 2 hot, pin 3 cold. MILAN Mi0 user manual Page 13... -
Page 14: Line Level Input
Frequent and/or continuous lighting of the limit LED indicates overdriving. If this occurs reduce the input level to the loudspeaker or enlarge your system with additional loudspeakers. 12. Power Indicator Illuminates green to indicate that mains power is connected and powered up. MILAN Mi0 user manual Page 14... -
Page 15: Connection Diagrams
LIMIT MIC GAIN BASS TREBLE LINE LEVEL LIMIT MIC GAIN BASS TREBLE LINE LEVEL GROUND LIFT MIC IN MIX OUT LINE IN GROUND LIFT MIC IN MIX OUT LINE IN POWER POWER DI box MILAN Mi0 user manual Page 15... -
Page 16: Stereo Pa With An External Mixer
LEFT RIGHT LIMIT MIC GAIN BASS TREBLE LINE LEVEL LIMIT MIC GAIN BASS TREBLE LINE LEVEL GROUND LIFT MIC IN MIX OUT LINE IN GROUND LIFT MIC IN MIX OUT LINE IN POWER POWER MILAN Mi0 user manual Page 16... -
Page 17: Stereo Pa With An External Mixer And Subwoofers
LIMIT MIC GAIN BASS TREBLE LINE LEVEL LIMIT MIC GAIN BASS TREBLE LINE LEVEL GROUND LIFT MIC IN MIX OUT LINE IN GROUND LIFT MIC IN MIX OUT LINE IN POWER POWER MILAN Mi0 user manual Page 17... -
Page 18: Stereo Pa With Powered Wedge Monitors
MIC GAIN BASS TREBLE LINE LEVEL LIMIT MIC GAIN BASS TREBLE LINE LEVEL GROUND LIFT MIC IN MIX OUT LINE IN GROUND LIFT MIC IN MIX OUT LINE IN POWER POWER MON 1 MON 2 MILAN Mi0 user manual Page 18... -
Page 19: Loudspeaker Placement
Consider adding subwoofers and/or further loudspeakers if the overall sound level or low frequency response is not enough for the room. MILAN Mi0 user manual Page 19... -
Page 20: Installing The Milan Loudspeaker
Mount the bracket to the wall using suitable fixings, and locate the loudspeaker onto the pole mount bracket. Rotate and angle the loudspeaker to optimise coverage and tighten the locking mechanism to stop the loudspeaker from being inadvertently removed. MILAN Mi0 user manual Page 20... -
Page 21: Troubleshooting
Use balanced cables and 3-pole balanced? connectors wherever possible. Check wiring. Ground loops? Lift audio ground on affected device with adapter Are signal cables near or Move signal cables running parallel to mains cables? MILAN Mi0 user manual Page 21... -
Page 22: Product Dimensions
MILAN Mi0 Product Dimensions Milan Mi0 MILAN Mi0 user manual Page 22... -
Page 23: Technical Specifications
IEC mains conector with integrated fuseholder Controls Mic gain Line level Mains on/off Bass and treble controls Ground lift switch Indicators SIG/LIMIT LED Power LED (green) Rigging options 6 x M10 threaded internal rigging points MILAN Mi0 user manual Page 23... -
Page 24: Spare Parts
PA-90 Speaker pole 35mm x 90cm long 07B508/1.0 PA-100 Speaker pole 35mm x 100cm long 07B508/1.2 PA-120 Speaker pole 35mm x 120cm long 07B830 PB-55 Pole mount wall bracket 07B392 EB-10/18 M10 shoulder eyebolt MILAN Mi0 user manual Page 24... -
Page 25: Warranty
This warranty does not affect any statutory rights of the purchaser. Should any fault develop with a component of your Turbosound system the faulty unit should be sent, in its original packaging, to the supplier or your local authorised Turbosound dealer with the shipping prepaid. -
Page 26: Contact Information
If your product requires servicing please contact your local distributor or retailer. A complete list is available on our website at: www.turbosound.com/distrib/distribs.php Product Information You can find full details on all our products on the internet at: www.turbosound.com/products MILAN Mi0 user manual Page 26...
Need help?
Do you have a question about the Milan Mi0 and is the answer not in the manual?
Questions and answers