Operating Mode - Symbol LS 1000 Reference Manual

LS 1000 Product Reference Guide: Chapter 4, Programming the LS 1004
Decode Attempt Time (cont'd)
7.0 seconds
6.5 seconds

Operating Mode

This parameter determines whether or not power remains on after a decode attempt.
The LOW POWER option provides for power-down after each scan attempt, while the
CONTINUOUS option provides for power to remain on after each scan attempt.
Low Power
Continuous
Aggressive Scan Mode
This parameter is available in the continuous operation mode only. When you set this
parameter to be enabled, the scanner scans the mirror continuously, even if it does not
illuminate the laser diode.
Aggressive Scan
Aggressive Scan
Disable
Enable
4-10