TYAN S8228 Notice page 54

Feature
Configure Remote Access type and parameters
Serial Port Number
Serial Port Mode
Flow Control
Redirection
After BIOS POST
Terminal Type
VT-UTF8 Combo Key
Support
Sredir Memory Display
Delay
Option
COM1
COM2
115200 8,n,1
57600 8,n,1
38400 8,n,1
19200 8,n,1
09600 8,n,1
None
Hardware
Software
Always
Disabled
Boot Loader
ANSI
VT100
VT-UTF8
Enabled
Disabled
No Delay
Delay 1 Sec
Delay 2 Sec
Delay 4 Sec
54
http://www.TYAN.com
Description
Select Serial port for console
Redirection. Make sure the
selected port is enable
COM 1—External COM
COM 2---BMC COM for SOL
Select Serial Port settings.
Select Flow Control for
console redirection.
Redirection is always active.
(Some Oss may not work if set
to Always)
Turns off the redirection after
POST Boot Loader.
Turns off the redirection after
POST Boot Loader.
Select the target terminal type.
Enable VT-UFT8 Combination
Key Support for ANSI/VT100
terminals.
Gives the delay in seconds to
display memory information.