Using The Time Delay Function; Using The Bake Only Menu - Sunbeam BM4500 Bakehouse Instruction Booklet

Using the Time Delay
The Bakehouse allows you to delay the
completion of your bread by up to 15 hours,
so you can wake up to the smell of freshly
baked bread, or go out for the day while your
Bakehouse does all the work.
Note: Do not use the Time Delay when the
recipe has perishable ingredients such as
milk, eggs or cheese as these may spoil.
1. Follow steps 1 – 5 on page 12.
2. Press and
the number of hours and minutes you want
your bread to be ready. Press to add or
minus time in 10 minute intervals.
3.Follow remaining steps 7 - 10 on page 12.
Note: You do not need to take into account
the amount of time required to cook the
program selected. This is automatically
registered in the Bakehouse when it is
selected.

Using the Bake Only menu

The BAKE ONLY menu offers the flexibility to
vary time. Use this setting for an immediate
baking process. This setting is useful if the
crust is too light or if your bread is not quite
done and requires more baking time. Check
every few minutes. This setting will bake for
up to 1 hour and 30 minutes and can be
controlled manually by pressing the Start/
Stop button to stop the function at any time.
1. Press the BAKE ONLY button to activate
this setting, no need to scroll through the
Menu list. Adjust the amount of time you
need using the
2. Press the START/ STOP button to begin
baking.
buttons until you reach
and buttons.
Example
Before leaving for work at 8am, you decide to
set the Time Delay so that the bread or
selected program will be ready and
completed by 6pm when you return home –
which is 10 hours later. Set the timer for
10:00. This tells you that your bread or
selected program will be complete in 10
hours. The Bakehouse will begin counting
down and your selected program will be
complete by 6pm.
This setting can also be used to complete
the bread baking process in case of a power
failure. If there has been a power failure,
allow the dough to rise in the bread pan
without power until it reaches 3/4 of the way
up the bread pan. Reconnect electricity and
press the BAKE ONLY button, and press
Start. Note: You may need to wait 10-15
minutes for the machine to cool down,
before you select the Bake Only setting.
If you attempt to use this setting before the
machine has cooled down, an error message
may appear on the display.
14