Table of Contents
Advertisement
• Large height is available on 19 and 24mm labels only.
Medium height is available on all except 6mm labels.
Small height is available on all labels.
• Press
to select the size menu:
SIZE
Use
to select the size symbol required, then press
to confirm the selection.
The "B" (BIG FONT) mode will produce highly visible
labels using the entire print height. In "B" mode, all text
will be printed as capitals (without accents).
• To create a label in "B" mode use
cursor under "B" and press
• When "B" is selected, all other options are not available.
JUSTIFY
JUST
Labels are normally printed with the text left-justified. On
multi-line labels, press
JUST
justified or centred text, as shown in the display. See
also LABEL LENGTH.
VERTICAL TEXT
VERT
• Rotates the text through 90° so that the label is printed
indicator in the display.
• Press again to cancel and return to horizontal text.
Note: Vertical text is not available on multi-line labels.
MULTI-LINE PRINTING
• Press
to start the next line of text on a multi-line
label, e.g.
line label in the display will be
This is a two
printed as:
This is a two
line label
Labels can be created as follows:
6mm
1 line small text
9mm
Up to 2 lines
small text
9mm
1 line medium text
12mm
Up to 2 lines
small text
12mm 1 line medium text
The line indicator in the display will confirm the number
of lines in the label.
BOXED/UNDERLINED PRINTING
• If no Box/Underline option has been selected, pressing
once will display the menu below:
BOX/UL
B
or
to move the
( BFONT lights in display).
to select left-justified, right-
, as confirmed by the VERT
and the display will
indicate 2 lines:
1
2
3
19mm
Up to
4 lines
or
small
24mm
text
19mm
Up to 2 lines
or
medium text
24mm
19mm
1 line large text
or
24mm
BOX/UL
Underlined -
Square Box -
Pointed Box -
Round Corners -
Crocodile Box -
Scroll Box -
3-D Box -
• Use
or
option. Either press
by the
or — indicator displayed), or
• When the
or — indicator is displayed, press
to cancel the Box/Underline option.
LABEL LENGTH
LTH
The length is normally calculated automatically, according
to the length of the text on the label.
The label length function displays the last used fixed label
length, eg:
40mm
• Press
to exit the length function without
DEL
changing the length, or:
• Use
or
inches max.) or decrease the length in 1mm / 0.04 inch
steps, or
or
10mm / 0.4 inch steps. The minimum fixed label length
is 45mm / 1.8 inches.
• Press
to fix the length for all subsequent labels,
confirmed by the LTH SET indicator in the display.
• Press
to cancel the fixed length and restore the
LTH
automatic length.
• If the fixed length is too short for the text, when you
press
or
PRINT
much longer the label is than the fixed length, eg:
and it will not print. Either cancel the fixed length (see
above), or press
length; the label is now long enough and can be
printed.
MULTIPLE COPIES
• Your LabelManager can provide multiple copies within
the range 1-99.
• To use this facility press
last number of copies set on the display, for example
# = 03
. Use
the number of copies required, then press
confirm ( COPIES indicator lights in the display). To
print the desired quantity press
5
=
DYMO
—
=
=
=
=
=
=
to move the cursor under the desired
to select the option (confirmed
DEL
1
10
to increase (5000mm / 196.85
to increase or decrease the length in
PREVIEW
+
the display will show how
CAPS
twice and use
to increase the
LTH
COPIES
+
STYLE
COPIES
then
STYLE
or
to increase or decrease
.
PRINT
to exit .
BOX/UL
to show the
to
Hide quick links:
Advertisement
Table of Contents
