Table of Contents
Advertisement
In this example, there are three saved labels, the cursor
is under the one which was last changed and the
contents of that label is displayed on the second line.
PREVIEW
You can press
+
to preview the entire
CAPS
contents of the label if required.
• Use
or
to move the cursor under an empty
location, then press
to save your label and return to
the label, or
to exit and return to the label.
DEL
• To delete the contents of a memory location, use
or
to move the cursor under the location, then
CLEAR
press
+
.
DEL
RECALL
RECALL
+
BOXES
UL
RECALL
• Press
+
to display the memory locations of
BOXES
UL
saved labels - as shown in ‘SAVE’ above.
To recall a saved label, use
or
to move the cursor
under each full location, until the label you require is
displayed.
PREVIEW
You can press
+
to preview the entire
CAPS
contents of the label if required.
• Press
to select the label required, or
to exit
DEL
and return to the current label.
• To delete the contents of a memory location, use
or
to move the cursor under the location, then
CLEAR
press
+
.
DEL
PATTERN
PATTERN
+
VERT
Background patterns or text cannot be printed on 6mm
wide labels, or with Mirror, Vertical or BIG text.
• If a pattern is already in use (the PATTERN indicator is
PATTERN
lit in the display), pressing
+
will cancel the
VERT
pattern.
PATTERN
• Press
+
to display the pattern menu:
VERT
bricks
check
weave
woodgrain
tint
tartan
text
diamonds
• Use
or
to move the cursor under the pattern
required.
• Press
to select the pattern required (the PATTERN
indicator will light in the display), or
to exit and
DEL
return to the current label.
A label previously saved in one of the ten memory
locations can be used as background text on another
label. For example, a label already saved containing the
name DYMO can be printed in the background of a label
with has LM300 as the foreground text:
DYMO
LM300
Note that background text is always printed in BIG font,
(regardless of the size selected for the original label)
and the amount of background text printed is
determined by the length of the foreground label.
• For background text, select ‘A’ . The display will show
the saved labels locations:
Contents of lab
Use
or
to move the cursor under the label location
required.
to select the label required (the PATTERN
• Press
indicator is lit in the display) and return to the current
label which will be the foreground text.
• Press
to print the label.
PRINT
LAST LABEL MEMORY
• The unit will store the last label text and settings when
turned off. Upon power-up, these will be restored and
displayed. Removal of the batteries for more than a few
seconds may cause this information to be lost.
ALIGN
ALIGNMENT
+
LTH
ALIGN
• If a fixed label length is set, each press of
+
LTH
will align the image to the left, the centre or the right of
the label, as shown in the display.
C
EURO CONVERSION
or
+
C
C
The LabelManager can be set to convert a chosen
C
currency into
or out of
+
Euros. When this is
C
C
selected, the label is scanned from right to left for a valid
number. The first occurence of a comma (,) or a full stop
(.), reading from right to left, will be read as a decimal
point. For example:
• If set to convert between Euros and Belgian Francs
C
(see ‘Euro Set-up’ below), pressing
+
will
C
convert the number on the label into Belgian Francs and
add the BF value to the end of the label:
‘Sale 10.00/’ becomes ‘Sale 10.00/BF403.40’
If the original number is at the end of the label, it will
be replaced by the BF value:
‘Sale 10.00’ becomes ‘Sale BF403.40’
• Pressing
will convert the number on the label into
C
Euros and add the Euro value to the end of the label:
‘Sale 10.00/’ becomes ‘Sale 10.00/e0.24’
If the original number is at the end of the label, it will
be replaced by the Euro value:
‘Sale 10.00’ becomes ‘Sale e0.24’
Note that values are rounded to the nearest one hundreth
of a unit.
7
Hide quick links:
Advertisement
Table of Contents
