Incremental Numbering & Barcodes - Dymo LabelManager 300 User Manual

• To cancel an existing multiple copies setting, press
COPIES
+ .
STYLE
Note: A row of 2 vertical dots will print between each
label as a cutting guide.
INCREMENTAL NUMBERING
Labels can be printed in increments of 1 automatically.
• Key in your starting number as the right most digit on
the label. Press
automatically move up a digit to the next number.
Press then
PRINT
• It is also possible to include automatic incremental
numbering when printing multiple copies.
• Key in your starting number, eg. LABEL 1A .
• Next press then
desired number of copies are displayed, eg.10, or use
or to move the cursor under the number digits
and key in the number required. Press
Now press then
LABEL 1A to LABEL 10A. While using fixed length
setting, the LabelManager will stop printing when the
label exceeds the fixed length.
BARCODE
BARCODES +
JUSTIFY
Barcodes can be printed on 19mm and 24mm wide labels
only and can be either full height or mixed with text on
one or two lines.
To create a bar code:
BARCODE
• Press +
JUSTIFY
previously selected.
• Press to cancel and return to the current
DEL
label, or
• Use or to step through the barcode types
available: EAN-13, EAN-8, UPC-A, UPC-E, CODE-39 and
CODE-128.
• Press to select the barcode type displayed. The
barcode indicator will light in the display and the
symbols and will appear at each end of the space
allocated for barcode characters.
• Enter the characters which will become the barcode,
eg: 1234567.
• Press to return to the label.
Note that the barcode indicator will appear in the display
whenever the cursor is positioned under barcode
characters.
• To edit a barcode, press
characters only will be displayed and the barcode
indicator will light in the display.
BARCODE
• Press or +
On a single line label, a bar code can be mixed with text
which is small, medium or large size:
then the display will
PRINT
to continue the sequence.
COPIES
followed by until the
STYLE
to confirm.
. This will print ten labels -
PRINT
to display the barcode type
BARCODE
+ ; the barcode
JUSTIFY
again to return to the label.
JUSTIFY
123
ABC
1 2 3
A two-line label always has small size text when it is
mixed with a barcode.
Text entered before pressing
BARCODE
+ , will result in text above the barcode:
JUSTIFY
Entering the text after pressing
will produce text below the barcode:
Text can be underlined, eg:
DYMO LABELMANAGER
123
ABC DEF
1 2 3
STYLE
STYLE
• Press to display the style menu:
Z
Use or to select italic , outline,
mirrored text, then press
indicator will light in the display.
• Press again to cancel and return to normal text.
STYLE
PAGE BREAK
You can divide your label into 'pages' or blocks of text,
each with its own text size and style settings. The number
of lines which can be created in each page will depend on
the label width.
• Press +
PREVIEW
• Press +
CAPS
break is identified by the symbol •||•.
SAVE
SAVE +
SIZE
You can save up to 10 labels in the memory.
• To save your current label, press
display the memory locations. If there are no labels
saved, the display will show:
with the cursor under the first location.
The boxes are full if they contain a label and the cursor
will be under the last changed label, eg:
Contents of lab
6
123
ABC
ABC
1 2 3
followed by
ABC
ABC
1 2 3
at the end of a barcode
ABC
1 2 3
ABC
123
or
ABC
1 2 3
DYMO LABELMANAGER
s h a d o w or
s h a d o w
to confirm. The STYLE
+
to insert a page break.
to preview the label; each page
+
123
1 2 3
DEF
SAVE
to
SIZE