SETUP Operation
BAND
SETUP
g DN
f UP
Connecting to an External Amplifier
When an external amplifier is connected, sound quality
can be improved by stopping the power supply of the
buit-in amplifier. The power output is set to OFF by the
following procedure.
1
Press and hold the SETUP button for at least 3
seconds.
2
Press the f UP or g DN button to select "PWR".
3
Press the BAND button to toggle the mode between
PWR ON and PWR OFF.
PWR OFF:
When activating the speakers, this setting can be
performed by connecting between the front and rear
pre-amplifier of the unit and the external amplifier. In
this setting, nothing is output to the speakers.
14
-EN
Front
left
Amplifier
Front
right
Rear
left
Amplifier
Rear
right
PWR ON:
The speakers are driven by the built-in amplifier.
SPEAKER
RIGHT FRONT
SPEAKER
RIGHT REAR
SPEAKER
LEFT REAR
SPEAKER
LEFT FRONT
NOTE
No sound is produced by the system when the power output is set
to OFF.
4
Press the SETUP button to return to normal mode.
Speakers
Front
right
Rear
right
Rear
left
Front
left