Dual AXXERA XDMA7800 Installation & Owner's Manual page 28

XDMA7800
Bluetooth Operation
®
Receiving and Ending Phone Calls
Receiving a Phone Call Incoming phone calls will automatically appear on the display
and a ring tone will be heard.
Note: The volume of the ring tone depends on the volume
level of the XDMA7800. The incoming ring tone may not be
heard if the volume is set to a low level or mute is activated.
• Press to receive the incoming phone call.
• Press to refuse the incoming phone call.
Note: If Auto Answer is set to ON in the setup menu, all
phone calls will be received automatically.
Ending a Phone Call During an active phone call, press to end a phone call.
If the phone call was received when listening to music in
another mode, the XDMA7800 will resume the previous
mode.
During a Phone Call
Volume Turn the volume knob to adjust the volume level during a
phone call. Bluetooth mode has a separate volume level
from the main volume of other modes. The XDMA7800 will
remember the volume level in Bluetooth mode and always
return to the last volume level for each phone call.
Microphone Mute Press MUTE during a phone call to turn the XDMA7800's
external microphone off. Press MUTE again to resume
microphone operation.
Audio Transfer Press DISPLAY during a phone call to transfer the call from
the XDMA7800 to the cell phone. Press DISPLAY again to
toggle the audio back to the XDMA7800.
Call Waiting During a phone call, if there is a second incoming call, press
to place the first call on hold and switch to the second
phone call. Press again to switch back to the first call.
Call Hold During a phone call, when there are no additional incoming
calls, press to place the call on hold. Press again to
resume the phone call.
Note: Audio transfer, call waiting and call hold must be
supported by the mobile phone and service provider to
function properly.
28