Schwinn 430 Troubleshooting Manual

3/12/24, 9:56 AM
Schwinn 430: How do I clear the "Please Stride" error message?
Follow this troubleshooting guide to help resolve a "Please Stride" error message on the console of your Schwinn 430 Elliptical.
Some common complaints may include:
Error code displayed
Please Stride message
Stride error code
Follow these steps to troubleshoot the issue
Tools you may need:
Phillips head screwdriver
Flathead screwdriver
(2) 6mm hex/Allen wrenches or the wrench from the
hardware card included with your machine
Magnet
Voltmeter
Crank puller (if removing crank arms for troubleshooting)
1.
Inspect the cables at the console. Unplug your machine from power. Use a Phillips head screwdriver to remove the 4
screws connecting the console to the mast. Lift the console up to expose the cables (reference 1). Disconnect and
inspect the cables and connections coming from the console for damage, such as crimps, cuts, or bent pins. If the
cables are undamaged, plug them back in, ensuring they are oriented in the correct direction, and retest your machine
[12733.A]. If the cable is damaged,
Console [12733.C].
about:blank
Schwinn 430:  How do I clear the "Please Stride" error message?
order a Mast Cable [12733.B]. If the console is damaged,
(Reference 1)
ID: 12733.1
order a
1/6