Table of Contents
Advertisement
Problems
Universal Remote Code
TV has colors of lines
across the screen
TV is turned on, stand
by light is green but no
picture
No Picture on PC (DVI
port)
No Sound on PC
Satellite / Digital Cable
box says HDCP not
compatible.
Satellite / Digital Cable
box has no video on
HDMI port.
Cannot get 1366x768
on PC.
SCEPTRE X20
This television is designed with SONY television universal
remote codes.
This is a big LCD screen, it takes time for electricity to charge
up to power the screen and takes time for the large screen to
deplete all it's residual electricity.
Please do not turn the TV on and off really quickly.
Between the time which you turn off the TV and the time
which you turn it on, there should be at least 50 seconds to 70
seconds.
This is a big LCD screen, and needs time to warm up to show
the picture.
Please wait for 15-30 seconds for the picture to show up.
Is your video card's DVI port turned off by default?
Go into your video card's advance menu to make sure 2nd
monitor / DVI port is turned on.
Make sure your green connector head audio cable is connected.
Reboot your satellite / digital cable box by turning them off
then unplugging the power cord.
Wait for at least 1-3 minutes and plug them back into the wall
and turn on the power.
Make sure you're using the HDMI->HDMI cable.
If you're using the cable we've included in the box, then you
should set your source to HDCP or DVI.
Although the screen's max resolution is 1366x768. No video
card maker can support that resolution. The widely support
resolution is 1360x768, please use that as your resolution.
Possible solutions
Page57
Advertisement
Table of Contents
