Table of Contents
Advertisement
6.
Component (High Definition Capable)
This connection port is for connecting DVD players, game consoles, or set-top
boxes via YPbPr1 source. Use the connectors indicated by the green (Y), blue
(Pb), and red (Pr) for video, and the white (L) and red (R) connectors for audio
input. Select YPbPr 1 source for video/audio. This connection uses component
cable.
7.
Subwoofer Out
The black (SUBWOOFER OUT) connector sends out bass signals to a subwoofer
by using RCA audio cable for connection.
AV
8.
These connection ports are used for connecting composite devices, such as VCR,
DVD player, game console, or set-top box via AV source. Use the connectors white
(L) and red (R) for audio and the yellow (AV) for video. You can also substitute the
yellow (AV) by using the black connector (S-VIDEO) for a better picture. Please
note you can only connect one type of video connector at a time. Please do not
connect both S-VIDEO and AV at the same time. This connection uses RCA
audio cable for sound, composite cable for video or s-video cable for video.
TV Tuner
9.
This connection port is used for connecting antenna, satellite box or cable service
via TV source. If you are using a satellite box select cable as your cable/air
setting. If you are connecting for cable service or antenna please don't forget to
switch for the correct setting under TV setup and scan for the channels. This
connection uses coaxial cable.
SCEPTRE X20
Page19
Advertisement
Table of Contents
