Table of Contents
Advertisement
Side View
About Control Keys
Power on/off – Please note this is a passive power button and doesn't
physically cut power off the TV but turn the TV into standby mode. When
turning LCD on/off, wait 5-10 seconds before pressing the power button
again.
Press CH buttons to switch between preprogrammed channels.
Press VOL buttons to adjust the audio volume.
Press this button to select among the following PC or TV or AV
inputs –TV, HDMI, HDCP, DVI, VGA-PC, YPbPr1(Component),
VGA-YPbPr2, AV. Please note HDMI, HDCP, and DVI are physically
shared under the same HDMI port. Please also note that the VGA port can
be used as a second Component (YPbPr) port via the optional VGA->
Component (YPbPr) cable.
Press the MENU button to activate the OSD (On Screen Display) main
menu. When OSD is activated, the CH buttons become navigation buttons
and the VOL buttons become adjusting buttons. Press MENU again to quit.
SCEPTRE X20
Page15
Advertisement
Table of Contents
