Installing Side Burner With A Grill - Cal Flame BBQ08852P Owner's Manual

10

Installing Side Burner with a Grill

If you are installing a side burner in conjunction with a gas grill, install
it in the following manner.
1. Assemble a 3/8" pipe nipple to the 3/8" pipe tee using Teflon tape
or pipe sealant. Use only sealant that is approved for use on LP
gas.
2. Install the pipe tee assembly to the grill intake pipe. Tighten as-
sembly and align the branch opening of the tee with the hole of
the cabinet.
3. Connect the flexible hose (male end) to the pipe tee.
4. Install and secure the side burner into the island by simply setting
it in place.
5. Connect the female end of the flexible hose to the side burner
intake pipe.
6. Connect gas supply to the grill.
7. Check for gas leaks using soap water solution.
www.calspas.com
Cal Flame Side Burners
LTR50001082, Rev. B