Fire-Lite DACT-UD Manual page 16

DACT-UD Installation
Primary Lines
Incoming Telco Phone Lines
Tip
Ring
Primary Phone Line PH-1
It is critical that the DACT be located as the first device on the incoming telephone circuit to properly function.
Network
RJ31X
Service
Provider's
Facilities
Telephone
Line
Network
Demarcation
Point
16
9. Refer to "Digital Communicator" on page 10, before proceeding with this step.
Connect the premises primary and secondary phone lines to the DACT as
illustrated in Figure 2.5 and test the system for correct operation
Green Wire
To premise phones
Red Wire
1 2 3 4 5 6 7 8
RJ31-X
Jack
Note: Shorting bars inside RJ31X Jack
removed during male plug insertion
7 foot cable
(MCBL-7)
order separately
Male Plug
Connectors
Female
Connectors
J3
PH1
DACT-UD
Figure 2.5 Wiring Phone Jacks
Customer Premises Equipment and Wiring
Jack
MS-9600 with DACT-UD
Telephone
Answering
System
Figure 2.6 DACT Installation
Green Wire
Ring
Red Wire
Tip
Ring
Tip
1 2 3 4 5 6 7 8
RJ31-X
Jack
CAUTION: It is critical that the DACT-UD
be located as the first device on the incoming
telephone circuit to properly function
J2
PH2
Unused
RJ-11 Jack
Fax Machine
Telephone
Installation in MS-9600 FACP
Secondary Lines
Incoming Telco Phone Lines
Ring
To premise phones
Tip
Secondary Phone Line PH-1
Computer
Telephone
Unused
RJ-11 Jack
DACT-UD PN 51899:B1 1/25/05