How To Delete The Data Stored In Memory - Citizen CH-462E Instruction Manual

HOW TO DELETE THE DATA STORED IN MEMORY

• The data stored in memory can be deleted.
• Press "MEMORY" switch to call up the data you want
to delete to the display. Keep the switch held pressed
for three seconds or more to delete the data. Then,
the buzzer sounds to let you know the completion of
deletion of the data.
• After the completion of data deletion, the average value
of the whole data stored in memory will appear on the
display. When all sets of data stored in memory are
deleted to leave no data to be shown on the display,
the unit will return the display to the state (the time
or measurement result indication) before "MEMORY"
switch is pressed.
- Eng 25 -