Message Table
Cause: The maximum allowable
limit of 100 alarms are already set.
All dates you select must be within the same year.
Cause: You are trying to highlight
dates for a period that spans multiple
years.
Batteries are getting weak! Replace them as instructed in the User's Guide.
Cause: Battery power is getting
weak.
Cells in the range you are deleting contain data.
Cause: Some of the cells in a range
you are deleting in the Pocket Sheet
Mode contain data.
Cause: An alarm time has been
reached for secret memory area data.
Check your home time setting and correct it if necessary!
Cause: This message appears after
an operation that can affect your
time settings.
Chapter 16 Technical Reference
100 alarms are already set!
Action: Wait until some of the
existing alarms are used, or delete
alarms you do not need to make
room for new ones.
Action: The range of dates when
specifying highlights must be within
one single year. Change your date
range specification so it is within the
same year.
Action: Replace batteries as explained
on page 19 of this User's Guide.
Delete them anyway?
Action: Press Yes to delete the cells
and the data they contain, or press
No to close the dialog box without
deleting anything.
Check the secret memory area!
Action: Enter the secret memory
area to view details about the alarm.
Action: Since all alarms and other
timekeeping related operations are
based on your time setting, be sure
to check it and make corrections as
necessary whenever this message
appears.
183