To receive data from an SF/CSF/NX Series Unit
1. After connecting the two units, turn on the PV Unit.
2. Display the list view in a mode whose data can be received with this
setup.
•
This configuration supports receipt of Contacts, Memo, Schedule and
To Do data.
•
REMINDER 1, REMINDER 2, EXPENSE, CALENDAR, SKETCH,
and FREE FILE data cannot be received.
3. Tap the Menu Bar icon to display the menu bar, and then tap System –
Data communication.
4. Tap the button next to SF/CSF/NX.
•
At this time you could perform steps 5 through 7 under "To make
communication parameter settings" above to make communication set
up parameter settings if you want.
5. Tap Set.
6. Perform the required operations on the SF/CSF/NX Series Unit to send
data. See the manual that comes with the unit you are using for details.
Chapter 9 Data Communication
127