Before using the PV-100/PV-200 for the first time… Use the following procedure to load batteries before using it for the first time. 1. Slide the battery switch on the back of the PV Unit to the REPLACE BATTERIES position. REPLACE BATTERIES NORMAL OPERATION Battery switch 2.
3. Load two new batteries, making sure that their positive (+) and negative (–) ends are facing in the proper directions. REPLACE BATTERIES NORMAL OPERATION 4. Taking care not to damage its tabs, replace the battery compartment cover back onto the PV Unit. 5.
7. Open the cover and touch the screen with the stylus to turn on power. • If the above does not appear on the display, remove the batteries and then reload them into the PV Unit, making sure you follow proper procedures.
About the EL backlight (PV-200 only) • The PV-200 is equipped with an EL backlight that allows easy viewing of display contents in a theater, or anywhere else where lighting is dim. • Note, however, that frequent or extended use of the EL backlight shortens battery life.