To Detach The Pv Unit From The Cradle; Data Communications Between Two Pv Units; To Connect Two Pv Units - Casio PV-100 User Manual

To detach the PV Unit from the cradle

1. Turn off PV Unit power.
2. Lift up on the PV Unit while holding down the cradle's Release button.

Data Communications Between Two PV Units

This section describes how to set up and communicate between two PV Units.

To connect two PV Units

1. Make sure that the power of both units is turned off.
2. Place the PV Units onto their cradles.
• Gently but firmly press down on the PV Units to ensure that they are
inserted into the cradles as far as they will go.
Chapter 9 Data Communication
Release button
113