Casio fx-7400G PLUS Instruction Manual page 24

Chapter 8 Programming
Description:
1. This command is basically identical to For~To~Next. The only difference is that
2. Omitting the step value automatically sets the step to 1.
3. Making the starting value less than the ending value and specifying a positive
Example: For 1 → A To 10 Step 0.1_
Function: This command repeats specific commands as long as its condition is true
(non-zero).
Syntax:
Parameters: expression
Description:
1. This command repeats the commands contained in the loop as long as its condi-
2. Since the condition comes after the LpWhile-statement, the condition is tested
Example: Do_
Function: This command repeats specific commands as long as its condition is true
(non-zero).
Syntax:
Parameters: expression
148
you can specify the step.
step value causes the control variable to be incremented with each execution.
Making the starting value greater than the ending value and specifying a negative
step value causes the control variable to be decremented with each execution.
A × 3 → B _
B ^
Next
Do~LpWhile
_
Do : ~ LpWhile <expression>
^
tion is true (non-zero). When the condition becomes false (0), execution pro-
ceeds from the statement following the LpWhile-statement.
(checked) after all of the commands inside the loop are executed.
? → A_
A × 2 → B_
B ^
LpWhile B >10
While~WhileEnd
While <expression>
_
: ~ WhileEnd
^