Connecting Two Units; Chapter 9 Data Communications - Casio fx-7400G PLUS Instruction Manual

Chapter 9 Data Communications

1. Connecting Two Units

The following procedure describes how to connect two units with an optional SB-62
connecting cable for transfer of programs between them.
u u u u u To connect two units
1. Check to make sure that the power of both units is off.
2. Remove the covers from the connectors of the two units.
• Be sure you keep the connector covers in a safe place so you can replace them
after you finish your data communications.
3. Connect the two units using the SB-62 cable.
SB-62 cable
• Keep the connectors covered when you are not using them.
164