Table of Contents
Advertisement
Installation and connection
Levelling the machine
The machine must stand perfectly level
on all four feet to ensure safe and
proper operation.
Incorrect installation may increase elec-
tricity and water consumption and may
cause the machine to move about.
False values may also show in the
Load % and Detergent % display.
The four adjustable screw feet are
used to level the machine. All four feet
are screwed in when the machine is de-
livered.
Screwing out and adjusting the feet
Gently tip the machine and prop it
up using a solid wood wedge for
example, to ensure stability.
Make sure the machine does not
slip as this could cause injury.
Loosen counter nut 2 with a spanner
by turning it anti-clockwise, then turn
58
foot 1 together with the counternut
and unscrew.
Put the machine back on all four feet.
Use a spirit level to check the ma-
chine is standing level.
Hold the foot 1 firm using a pipe
wrench and using a spanner turn the
counternut 2 to the right firmly up
against the housing.
All four counternuts must be firmly
up against the housing. Please also
check this for the feet which did not
need adjustment. Otherwise there is
the danger of the machine moving
about.
Hide quick links:
Advertisement
Table of Contents
