HP Kayak XU 04xx Handbook page 12

HP Kayak XU Series 04xx and HP Kayak XW Series 04xx
The ELSA GLoria Synergy+ includes 4 MB of installed SGRAM memory on the
video board. Added to this, there is a preinstalled 4 MB SO_DIMM (SGRAM)
memory module, giving a total of 8 MB, which cannot be further upgraded. No
2
switch or jumper settings are need to be changed (all jumpers should be left in
the positions in which they were set by the manufacturer).
HP VISUALIZE fx6 Hardware Accelerator
The HP Kayak XW Series 0480 contains an HP VISUALIZE fx6 graphics
hardware accelerator. There is a total of 18 MB of installed Synchronous
Graphics RAM (SGRAM) frame buffer on the graphics controller board.
HP VISUALIZE fx6 Texture Mapping Module
An additional 32 MB of Synchronous Dynamic RAM (SDRAM) texture memory
can be added by installing the texture mapping module accessory (D6795A) for
the HP VISUALIZE fx6 Graphics Accelerator.
For instructions on how to install the texture memory module, refer to the HP
VISUALIZE fx6 Texture Module Installation Guide which is supplied with the
accessory.
Mini-Tower HP Kayak XU Series 04xx and HP Kayak XW
PC Workstations Series 04xx 2-11