HP Kayak XU 03xx Troubleshooting Manual page 17

Hp kayak xu series 03xx, troubleshooting your pc workstation
Hide thumbs Also See for Kayak XU 03xx:
Table of Contents

Advertisement

HP Kayak XU 03xx PC Workstation Troubleshooting Your HP PC Workstation
Check the IDE Devices configuration settings in the Setup program
(Advanced > IDE Devices).
Check the Hardware Protection settings in the Setup program
(Security > Hardware Protection).
Check the Boot Device Security settings in the Setup program
(Security > Boot Devices Security).
Check that the Integrated Bus IDE Adapters item is set to Both in the
Setup program (Advanced > IDE Devices).
No Sound from the CD-ROM Drive
If you are having problems with sound when playing a CD:
Check that the volume control (if present) on the CD-ROM or
CD-RW drive front panel is not set to the minimum.
Ensure that the disk in the drive is an audio disk and not a photo CD
or data CD.
If using headphones or external speakers, check that they are
properly connected to the Audio Front Panel (not to the audio jack
for the CD-ROM).
Check that the CD Audio switch is selected in the mixer (if selected
a speaker icon will appear in the taskbar).
Check that the CD audio cable is correctly installed and is connected
to the system board.
The CD-ROM Drive is Idle
If the drive does not appear to be working, try accessing the disk by
clicking on the drive icon or drive letter assigned to the drive by your
operating system.
If Your PC Workstation Has a Hardware Problem
English
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kayak xu 03 series

Table of Contents