HP Kayak XA-s 02xx PC Workstation - Setting Up and Using Your HP Minitower PC Workstation
Connecting to a Network
Your PC Workstation has a 10BT/100TX LAN interface adapter.
The LAN adapter supports both 10 Mbit/s and 100 Mbit/s operations
and automatically detects which network type is being used.
1 Connect the RJ-45 plug on your network cable to the LAN connector
on your LAN PC Workstation Adapter. Push the plug into the
connector until the plug clicks into place.
2 Attach the other end of the LAN cable to a hub (or into a wall socket
that is connected to a hub).
Let your Network Administrator know that you are connecting your
PC Workstation to the network.
Refer also to the online Network Administrator's Guide (preloaded
on your PC Workstation) for further instructions on setting up your PC
Workstation for a LAN connection.
Connecting to a Network
The board shown here is a
combined SCSI/LAN board.
Some models do not have
the SCSI option.
English
3