System Board Switches - HP Kayak XA-s 02xx Technical Information Manual

HP Kayak XA-s 02xx PC Workstation - Technical Information for Minitower Models

System Board Switches

Switches 1 through 5 are used for processor settings and should not be
changed. Replacing the processor with a different processor is not
supported by HP.
Switches 6 to 10 are used as shown in the following table:
1
Switch
Use Switch to:
6 - CLEAR CMOS Retain or clear CMOS memory:
•
•
7 - PSWRD Enable or clear (and disable) User and System Administrator
Passwords stored in EEPROM:
•
•
8 - KEYB power on Enable or disable power on using the keyboard:
•
•
9 - BOX Select box type:
DEFINITION
•
•
10 - BIOS •
Recovery Mode •
1. On the switch, UP=OFF and DOWN=ON.
UP to retain CMOS memory — DEFAULT
DOWN to clear CMOS memory.
UP to enable passwords — DEFAULT
DOWN to clear passwords.
UP to disable keyboard power on
DOWN to enable keyboard power on — DEFAULT.
UP to select a Mini Tower model — DEFAULT.
DOWN to select a Desktop model.
UP to enable normal mode — DEFAULT.
DOWN to enable recovery mode.
System Connectors and Switches
System Board
Switches
English 11