Table of Contents
Advertisement
Quick Links
INSTALLATION AND OPERATING
INSTRUCTION BOOKLET
WMI1010
INTEGRATED WASHING MACHINE
THIS APPLIANCE COMPLIES WITH EUROPEAN DIRECTIVES
EMC 89/336/ECC
LOW VOLTAGE 73/23/ECC
ECC-LABELLING 93/68/ECC
IMPORTANT: You must read this instruction book before
installing or using this appliance and retain it for future use.
Caple Products
Telephone 0870 2411142
Facsimile 0117 982 6878
Page
1
WMi1010 user manual.doc
Advertisement
Table of Contents
Related Manuals for Caple WMI1010
Summary of Contents for Caple WMI1010
-
Page 1: Instruction Booklet
THIS APPLIANCE COMPLIES WITH EUROPEAN DIRECTIVES EMC 89/336/ECC LOW VOLTAGE 73/23/ECC ECC-LABELLING 93/68/ECC IMPORTANT: You must read this instruction book before installing or using this appliance and retain it for future use. Caple Products Telephone 0870 2411142 Facsimile 0117 982 6878 Page WMi1010 user manual.doc... -
Page 2: Installation Instructions
INSTALLATION INSTRUCTIONS Positioning After your washing machine has been placed in the desired location, level it by means of the front left foot, then the counter nut must be locked by means of the special key provided. Warning: if the machine is not perfectly leveled, it will be unstable, noisy and may lead to malfunctions and broken parts. -
Page 3: Technical Features
Removing and cleaning filter Remove the plastic base guard at the bottom of the machine by pressing and pulling upwards on the two tabs. Place a rag under the washing machine to adsorb any residual water. The filter is located under the base. Turn the filter handle counterclockwise and pull out the filter. - Page 4 FUNCTIONS AND PREPARATION FOR WASHING Detergent dispenser The detergent dispenser is divided into four compartments 1. Pour washing detergent in this compartment for the prewash cycle (MAX 45 grams). 2. Washing detergent in this compartment for the wash cycle (MAX 130 grams). 3.
-
Page 5: Power Indicator
CONTROL PANEL To become familiar with your machine functions, compare the symbols on the control panel with those described below. ON/OFF By pressing this button the machine turns on and executes the set wash cycle. It is used to turn the washing machine on and off. POWER INDICATOR When lit, it indicates that the washing machine is electrically energized. - Page 6 TIMER DIAL Used to select the wash cycles and to display them during operation. To select the cycles, turn the dial clockwise until the mark coincides with the selected cycle. WARNING: Do not turn the timer dial while the machine is energized. Do not turn the timer dial counterclockwise. THERMOSTAT DIAL To set the temperature, turn the dial until the mark coincides with the selected temperature.
- Page 7 COTTON AND LINEN CYCLES Cycles Type of fabric Detergent Thermostat Wash cycle dispenser position description Description to be used Very dirty For very dirty 40°-95° Wash prewash Resistant (cotton, Wash from 40° to 95°C (linen) fabrics, also (3-4) Rinse With organic stains Intermediate and final spin Very dirty For very dirty...
- Page 8 WASH CYCLES FOR SYNTHETIC AND MlXED FABRICS Cycles Type of fabric Detergent Thermostat Cycle dispenser position Description Description to be used Normally dirty For normally dirty 2-(4) 40°-60° Wash from 40° to 60°C delicate and synthetic Rinse fabrics Stops with water in drum Normally dirty For normally dirty 2-(4) * - 40°...
- Page 9 FITTING DÉCOR DOOR Make holes on the wooden door according to the instructions enclosed with the machine. Take hinges (A) out of the bag and fix them to the door. • Take jack (B), its support (C) and fix one to the other by means of screws (G). •...
- Page 10 Page WMi1010 user manual.doc...
Need help?
Do you have a question about the WMI1010 and is the answer not in the manual?
Questions and answers