Maintenance Instructions - Electrolux Z5600 Series Owner's Manual

Electrolux upright vacuum cleaner owner's guide
Table of Contents

Advertisement

Micron Filter
Check the micron filter periodically and change as
needed. For maximum efficiency, replace the micron
filter twice a year.
To Replace Micron Filter
1. Push down on latch and pull out on Micron filter door
to remove.
2. Grasp filter and pull out.
3. Place new Micron filter into cleaner.
4. To close, place micron filter door on top of bottom tab,
pivot door up and press door against cleaner until it
latches.
Use ELECTROLUX replacement filters ONLY.
HEPA Filter
Check the HEPA filter periodically and change as
needed. For maximum efficiency, replace the HEPA
filter twice a year.
To Replace HEPA Filter
1. Push down on latch and pull out on HEPA filter
door to remove.
2. Grasp filter and pull out.
3. Place new HEPA filter into cleaner.
4. To close, place HEPA filter door on top of
bottom tab, pivot door up and press door
against cleaner until it latches.
Riser Visor Turbo Nozzle

Maintenance Instructions

1. To open Turbo Nozzle, unscrew the
two (2) screws on the side (as pictured).
2. Lift up the bottom housing.
3. Clear blockage from brushroll area.
4. To close, align top and bottom housings and
tighten with the two (2) screws.
14
(on certain models only)
(on certain models only)
1
Screws
3
Latch
Micron
Filter
Door
Micron
Filter
Latch
HEPA
Filter
Door
HEPA
Filter
2
4

Advertisement

Table of Contents
loading

Table of Contents