Filter Maintenance Schedule - Electrolux Z3040 Series Owner's Manual

Hide thumbs Also See for Z3040 Series:
Table of Contents

Advertisement

Maintenance Schedule is also located on back side of dust cup.
Assemble the vacuum before using. Moving parts. Make sure ON/OFF switch is in OFF (O) position before plugging in power cord.
Foam Filter
EF187
HEPA Filter
EF186
Filter Screen
Brush Roll
Due to the powerful motor in this vacuum, you may notice a higher noise level than with your previous model. You
may also notice that it picks up considerably more dust than your old model and, as a result, you may need to empty
the dust cup more frequently.
Proprietary Carpet Conditioning and Air Freshening Materials
After using proprietary carpet conditioning powders, it is recommended that the filters be changed. Some of these
preparations contain substances which if left in the vacuum for extended periods could damage the plastic mouldings which
form the structure of the vacuum.
Many air fresheners, household deodorants, sprays and polishes contain a highly flammable gas propellant. Because
of this, it is particularly important that these products are used strictly in accordance with the relevant manufacturer's
instructions.
It is essential that none of the above products are sprayed directly into the vacuum or any of its filters, hose assembly,
dustbag chamber or dust cup.
4
All manuals and user guides at all-guides.com

Filter Maintenance Schedule

EACH USE
PULL UP HANDLE
WEEKLY
TURN LID
&
FILTER SCREEN
6 MONTHS
TURN LID
ZE090 Belt
MONTHLY
&
REMOVE
EMPTY
FOAM FILTER & FILTER SCREEN – Wash & Clean
,
&
REMOVE FILTERS
WASH
DRY THOROUGHLY
&
REMOVE
REMOVE FOAM AND REPLACE HEPA FILTER
BELT – Replace a worn, cut or out-of-shape belt
DUST CUP – Empty
CLOSE LID UNTIL IT CLICKS
LINE UP WHITE NOTCHES
AND REPLACE FILTERS
HEPA FILTER – Replace
REINSTALL FILTERS
BRUSH ROLL – Clean
&
LOCK TABS
SNAP HANDLE
align to
turn to
lock
open/close
LINE UP LID AND CLOSE
align to
turn to
open/close
lock
LINE UP LID AND CLOSE

Advertisement

Table of Contents
loading

Table of Contents