Heavy duty commercial upright vacuum cleaner (12 pages)
Summary of Contents for Electrolux AIRSPEED ZAS1000A
Page 1
ZAS1000A Designed with Electrolux Customer HELPLINE 0800 222 825 pets in mind (Toll Free South Africa Wide) AIRSPEED TECHNOLOGY AIRSPEED TECHNOLOGY Airspeed Technology for high velocity air flow High velocity airflow DIRECTIONAL SUCTION VALVE Directs air to floor or hose for optimal...
2. Examine the mains supply cable for damage (only after removing the plug from the socket outlet). 3. If there is any sign of damage to the supply cable it MUST be renewed. The repair MUST be carried out by an Electrolux Service Agent or a similar qualified person.
Never use the vacuum cleaner if the cord is damaged. • If the cord is damaged, it must be replaced only by an authorized Electrolux service centre in order to avoid a hazard. Damage to the vacuum cleaner’s cord is not covered by the warranty.
How to use your accessories CAUTION: Do not place the cleaner on furniture or steps for any period of time as the brushroll may cause damage. Place the cleaner on the floor with the handle in the upright/storage position while using accessories.
How to empty the dust container and maintain the HEPA filters READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER. Moving parts! Power switch is marked for ON-OFF. DUSTBIN - Empty after each use Press lever to release bottom lid. Close bottom lid Debris will empty.
How to maintain your vacuum cleaner Make sure vacuum cleaner is turned off and power cord is unplugged. Maintain brush roll Motor pulley can become hot with normal use. Remove hair and threads from brush roll periodically. Do not remove end caps. Check belt ZE090.
Page 9
If these conditions are found, fix them and wait at least 30 minutes before attempting to use the vacuum. After the 30 minute period, plug the vacuum back in and push the on/off switch On ( I ). If the vacuum still does not run, please call Electrolux Customer Care Helpline. Service •...
Trouble shooting Make sure vacuum cleaner is turned off and power cord is unplugged Problem Cause Solution Motor will not start Power plug • Push plug securely into outlet, Try another outlet or check circuit breaker. Power switch • Step on power to turn vacuum on. Thermal cut-off •...
For future reference we suggest you record the following details here, and keep the receipt with the handbook as proof of purchase. PURCHASED FROM: .............................................................. DATE PURCHASED: ........................MODEL NO:..................................SERIAL NO. Electrolux reserves the right to make improvements or modifications to the product from time to time and consequently the details given in this book are subject to alteration without notice.
Page 12
Electrolux Customer HELPLINE 0800 222 825 (Toll Free South Africa Wide) Don’t forget to use Genuine Electrolux belts and filters. Caution: Damages caused by the use of non-genuine parts are not covered by the Electrolux warranty.