Canon VB150 User Manual page 37

●S018 Write error during file system checking (err)
chkdsk: Disk Write Error.
Message
A write error occurred during file system checking.
Explanation
Response If this error affects the internal file system, contact an authorized Canon service
representative. If it affects a memory card, replace the memory card.
●S019 Read error during file system checking (err)
chkdsk: Disk Read Error.
Message
A read error occurred during the file system check.
Explanation
Response If this error affects the internal file system, contact an authorized Canon service
representative. If it affects a memory card, replace the memory card.
●S020 File system checking ended abnormally (err)
device name (%1) chkdsk unsuccessful.
Message
Device name (/dev/hd0a | ata card)
%1
This error message appears after error messages S010 to S019. If the device name
Explanation
is ata card, the error is on the memory card. If the device name is /dev/hd0a, it affects
the internal file system.
Response If this error affects the internal file system, contact an authorized Canon service
representative. If it affects a memory card, replace the memory card.
●S021 File system structural defect (err)
disk has a structural detect.
Message
Explanation Due to a file system structural defect, file system check and mount is not possible.
Response If this error affects the internal file system, contact an authorized Canon service
representative. If it affects a memory card, replace the memory card.
●S023 The erase count for the on-board flash ROM exceeded the limit (err)
FlashROM erase count (%1) exceeded the limit
Message
%1 Erase count for the on-board flash ROM
Explanation The erase count limit for the on-board flash ROM has been exceeded.
Contact an authorized Canon service representative. If you continue to write data
Response
after this error occurs, there is a risk of data corruption.
●S024 Ethernet connected (info)
fe0: Link Up - %1 %2 Duplex
Message
Line speed (10Mbps | 100Mbps)
%1
Communication mode (Full | Half)
%2
Explanation Ethernet link is up.
Log Messages
34