Canon VB150 User Manual page 19

■Applet Tag Descriptions
Attribute Name Omissible
code
No
codebase
No
width
No
height
No
archive
Yes
When specifying an address included in the codebase attribute of the applet
e
tag and a URL parameter of the applet, specify one that can be accessed from
Tip
the client's computer. This is particulary necessary when using NAT (→ P.22).
This parameter specifies the applet file name. Enter "LiveApplet.class" or "Glimpse.
class". If this parameter is not specified correctly, the applet (LiveApplet or Glimpse)
is not downloaded.
This parameter specifies the directory that contains the applet.
http://HTTP server IP address: port number/directory/
If this parameter is not specified correctly, the applet (LiveApplet or Glimpse) is not downloaded.
Directories are fixed for each applet.
Directory (LiveApplet)=-wvdoc-01-/LiveApplet
Directory (Glimpse)=-wvdoc-01-/Glimpse
This parameter specifies the size of the area acquired for the applet (in pixels).
For LiveApplet, if the value specified is smaller than the LiveApplet drawing area, the applet may not
be displayed correctly. If the camera control function GUI is to be added (controller_style=normal),
add about 130 to the value. Eg. For an image size of 320 × 240, width=450.
For Glimpse, because the areas used for the applet and for the video display are the same size,
specify the same value as the image width. Eg. For an image size of 320 × 240, width=320.
As for width.
For LiveApplet, add around 140. Eg. For an image size of 320 × 240, height=380.
For Glimpse, specify the same value as the image height. Eg. For an image size of 320 × 240, height=240.
Specify LiveApplet.zip or Glimpse.zip.
Using the Viewer for Java to Distribute Videos
Description
16