SmartBase MPC600F/MPC400 Chapter 3: Assembly and Disassembly
Disassembly 103. ADF ass'y
(1) Remove the stop arm from the DF rear cover.
(2) Remove screw (a) and detach the DF rear cover.
(3) Remove three cables (b) from the ADF board.
(4) Remove screw (c) and detach the grounding wire.
(5) Remove screw (d) and detach the ADF board.
(6) Lift the ADF ass'y to take it off from the main unit.
Stop arm
ADF ass'y
a
DF rear cover
d
c
ADF
b
board
Figure 3-26 Disassembly 103
3-29