Error Codes - Canon FAX-L350 Service Manual

FAX-L350 Chapter 3: Maintenance and Service
"START AGAIN"
Cause:
Solution:
"LOAD PAPER"
Cause:
Solution:
"CHECK COVER/CART"
Cause:
Solution:
Cause:
Solution:

4.2.2 Error codes

a) Service error code output
When service data #1 SSSW SW01 bit 0 is set to "1", then service error codes are printed on the activity
management reports, reception result reports and error transmission reports when communication is ter-
minated due to an error. Also, the following is displayed when an error occurs.
An error occurred on the phone line or in the system.
Start the procedure again from the beginning.
The fax is out of paper.
Add more paper to the paper tray.
The toner cartridge is not installed properly.
Make sure the toner cartridge is installed properly.
Front cover is not closed.
Close front cover.
TX/RX No. 5001
START AGAIN ##106
Figure 3-3 Service Error Code Display
3-12
Display alternates repeatedly