Timer And Changing The Message Display Language; Programmable Timer; Ajastin; Ohjelmoitava Ajastin - Electrolux Trilobite ZA2 Owner's Manual

Timer and Changing
the Message Display Language
Normal. Timer: Auto
Select timer?
Timer
It is possible to set the time duration for
Normal or Quick vacuuming.
1. Select the desired vacuum program, or
press twice til "Select timer?" is shown.
Confirm by pressing .
2. Set the desired time setting by pressing
and then confirm by pressing
"Auto" is chosen Trilobite will cal culate its
own vacuuming time. When "On" is chosen,
use to set desired time, confirm by
pressing .
When "Off" is chosen Trilobite will clean until
charging is needed. For normal vacuuming
program, this is the vacuuming time after
edge cleaning.
3. Press to commence vacuuming.
12 English
Language
Trilobite is able to present the information on
the display in a number of different languages.
1. To change the display language, switch on
Trilobite and press .
2. Press until the displays asks whether you
want to change the language. Press
. When 3. Press to select the desired language and
confirm by pressing
Trilobite will now show display messages in
the selected language.
Status Messages
When you select a function, a status message is
shown on the display for about seven seconds.
After this, the name of the function is shown
again. It is of course possible to change or
confirm a displayed function even while the
status message is shown.
Programmable
Timer
Trilobite can be programmed to clean at a
particular time on every day of the week.
To use this function, you must first activate
and program Trilobite's day and time func-
tions. You can then set which day or days you
want Trilobite to clean on. After programming,
it is a simple matter to activate or deactivate
.
the setting.
.
NOTE: Trilobite can only start program med
cleaning if it is placed in the charging station.
Set clock
1. Start Trilobite.
2. Press
3. Press
4. "Set time" is displayed.
5. Press
6. "Set day" is displayed. Press
desired day is displayed.
7. Press
8. "Set clock" is displayed.
9. Press
10. Press
11. Press
is displayed.
12. Press
13. Press
displayed.
14. Press
displayed.
Normal. Timer: Auto
Select start time?
until "Select start time" is displayed.
.
.
until the
.
until the desired hour is displayed.
.
until the desired 10-minute block
.
until the desired minute is
. The day and time are now