Changing The Batteries; Troubleshooting - Electrolux Ultimate 800 Instruction Book

This appliance contains non-rechargeable batteries, these batteries are not to be recharged. • Do not expose the appliance or battery to excessive temperatures.
n
Be aware of the risk of terminals of the battery-operated appliance or battery being short-circuited by metal objects. • Different types of batteries or new and used
ers.
batteries are not to be mixed. • Exhausted batteries are to be removed from the appliance and safely disposed of. • If the appliance is to be stored unused for a long
he
period, the batteries should be removed. • Do not use modified or damaged batteries.
ne
Remove the batteries from the product before scrapping. Follow your country's rules for collection of batteries and electrical products.
r
rty
TIPS ON HOW TO GET THE BEST RESULTS
ap
r
NOZZLE/ACCESSORY
3in1 accessory tool
1
at
lid
ce.
Turbo nozzle*
d
ParkettoPro nozzle*
nge
ve
Furniture nozzle*
e
rns
With AUTO-function the cleaner automatically adjust the suction power
in order to give an optimal cleaning performance and comfort on every surface. For manual regulation, follow graphics for optimal performance.

TROUBLESHOOTING

PROBLEM
The vacuum cleaner does not start
The s-bag® indicator light is illuminated
e
The filter indicator light is illuminated
ose
The cleaner stops
Reduction of suction capacity versus
normal
ext
Water has been sucked into the vacuum
cleaner
For any further problems, contact an authorized Electrolux service centre.
Change batteries when front
lights start blinking fast. Use 2
AA batteries.
USE FOR:
3 tools in 1:
1. Dusting tool for hard surfaces
(bookshelves, skirting boards etc).
2. Upholstery tool for textiles
(curtains, upholstery etc).
3. Crevice tool for narrow spaces
(behind radiators etc).
2 3
Carpet nozzle:
- Brushes and vacuums at the same
time (best pick up of hair, fibres
etc).
- Brush roller is driven by the airflow
of the vacuum cleaner.
- Not suitable for carpets with very
deep piles and long fringes, anti-
slip carpets like door mats or water
resistant carpets. Use universal
nozzle instead.
Hard floor nozzle:
- For gentle cleaning of hard floor
(parquet, wooden floor, tiles etc).
- Best dust pick up on hard floor
with crevice.
Delicate Surfaces Tool:
- Removes fine particles and dust
from delicate surfaces in your home
SOLUTION
• Check that the cable is connected to the mains.
• Check that the plug and cable are not damaged.
• Check for a blown fuse.
• Check if the battery indicator lamp in the remote control handle responds (certain models only).
• Check if the s-bag® is full or blocked.
• If you have already changed the s-bag®, change the motor filter.
Change, or wash (if washable), the exhaust filter.
The cleaner might be overheated: disconnect it from the mains; check if the nozzle, tube, hose or filters
are blocked. Let the cleaner cool down for 30 minutes before plugging it in again.
If the cleaner still does not work, contact an authorized Electrolux service centre.
• Check if the s-bag is full or blocked.
• Check if the motor filter is clogged and needs changing.
• Check if nozzle is blocked and needs to be cleared.
• Check if hose is blocked by squeezing it gently. However, be careful in case the obstruction has been
caused by glass or needles caught inside the hose.
Note: The warranty does not cover any damage to the hose caused by cleaning it.
It will be necessary to replace the motor at an authorized Electrolux service centre.
Damage to the motor caused by the penetration of water is not covered by the warranty.

CHANGING THE BATTERIES

NOZZLE/ACCESSORY
AllFloor Auto LED
nozzle (with front lights)
Mini Turbo nozzle*
FlexProPlus nozzle*
Change battery when light
indicator turns red or is not
responding when pressing any
button. Use only batteries type
LITHIUM CR1632
USE FOR:
Universal nozzle:
- For all floor types, secures excellent dust
pick up both on carpets and hard floors.
- Recommended to use Allfloor mode,
which enables going from hard floor to
carpet without adjusting the setting.
- For deep cleaning on carpet, change the
nozzle setting with the slider to Carpet
mode.
- Front light helps to detect dust and dirt in
dark spaces (under furniture etc).
Upholstery nozzle:
- Brushes and vacuums at the same time
(best pick up of hair, fibres etc).
- For textile furniture, car seats, mattresses
etc.
- Brush roller is driven by the airflow of the
vacuum cleaner.
- Not suitable for carpets with very deep
pile and long fringes as it can get stuck in
the rotating brush roll.
Hardfloor nozzle:
- For reach under/between furniture,
corners and other obstacles.
- Can easily turn 180 degrees for direct
access to narrow spaces.
GB
GB
FR
BG
CZ
DE
DK
EE
ES
FI
GR
HR
HU
IT
LT
LV
NL
NO
PL
PT
RO
RU
SE
SK
SL
SR
TR
UA