Lightweight Upright VACUUM CLEANER Household Type Owner’s Guide Z400 Series IMPORTANT For any advice and to order filters and accessories on your cleaner, please telephone Customer Care 08706 055055 Index Important Safeguards ....2 Service Information ....4 Parts & Assembly ....5-6 Use &...
IMPORTANT SAFEGUARDS When using an electric appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER WARNING To reduce the risk of fire, electric shock, or injury: • Do not use outdoors or on wet surfaces. •...
Page 3
In the event of loss of the fuse cover, replacements can be obtained from your Electrolux Retailers and must be of the same colour as indicated by the coloured insert on the base of the plug.
Important - in the event of the mains supply cable of this vacuum cleaner requiring replacement, we recommend that this be carried out by a Electrolux Service Agent. Spares New filters can be obtained from Authorised Electrolux Dealers and electrical retailers.
HOW TO ASSEMBLE Loop Attach Handle 1. Locate the handle and body. Handle 2. Line the handle up with the hole in the top of the body. Flat side of handle and loop forward. 3. Push handle down into body while pressing button on back of the body.
Page 7
Filter Top 4. Replace filter with filter top facing up to ensure proper filter installation. Scraper Replace a torn filter. To order additional dust cup filters call Electrolux on 08706 055055.
HOW TO MAINTAIN (continued) Brush Roll NOTE: Turn off switch and unplug the electrical cord before inspecting brush roll. Long hair, thread, string, etc. can wrap around the revolving brush roll and result in reduced performance. To check brush roll for debris turn cleaner nozzle over and inspect for wrapped matter.
The guarantee may be invalidated by unauthorised repair or modification of the appliance. d. You may be charged by Electrolux if you call for an engineer to resolve a problem that we believe is covered in the instruction booklet.