Product Description; Tuotekuvaus - Electrolux Trilobite ZA2 Owner's Manual

Product description

Filter lid
lock button
Terminals for
connection to
charger
Battery charger
Connection
terminals
Trilobite
Trilobite navigates using ultrasound and uses infrared light to detect
level differences. During edge cleaning, it receives information about
the size of the room. Edge cleaning serves as the basis for the estimated
duration for independent vacuuming in the Normal vacuuming mode.
NOTE! Trilobite is not fully charged upon delivery. Before using it
the first time, connect it to the battery charger. (Refer to page 8.)
A full battery charge requires approximately two hours.
Battery charger
When Trilobite has completed Normal or Quick vacuuming and it
has indicated the charger (flash in display. Refer to page 10), it returns
to the charger. The batteries are then charged and it is ready for more
work.
Magnetic strip
The magnetic strip serve as "virtual walls" and are important for
cor rect operation. Use it to block e.g. door and wall openings and
level differences lower than 10 centimetres. (Refer to page 9.)
4 English
Display
Use a pair of scissors or a knife to trim the magnetic strip to the
cor rect length. See page 9 in the user instructions to see how the
magnetic strip should be fitted.
Display and function keys
The function keys are used to start/stop Trilobite and for performing
any necessary setup and programming. The display clearly shows
which function is selected.
Handle
The handle, with its ergonomic grip, is used to lift and carry Trilobite
easily.
Roller
The motor-driven rotating roller contributes to excellent dust pickup.
Dust collector
The dust collector, with its efficient microfilter, has a high capacity
and is very simple to lift out for emptying. (See also page 5.)
Roller
Drive wheel
Rating plate
Dust
collector
Flexible bumper
Handle
Self-adhesive magnet strip
for permanent installation
Roller cover
lock button