Lightscribe Requirements; Burning A Lightscribe Label With Sonic Express Labeler - HP Pavilion d4100 - Desktop PC Getting Started Manual

66
Getting Started Guide

LightScribe requirements

Burning a label with LightScribe requires three things:
• LightScribe-enabled DVD drive (select models only).
• Labeling software that supports LightScribe.
• LightScribe discs (sold separately).
Burning a LightScribe label with
Sonic Express Labeler
1 Click Start, All Programs, Sonic, and then click Express Labeler.
NOTE: You can open Express Labeler from within DigitalMedia Plus by clicking
Tools, and then Label Disc.
2 In the Step 1: Select Project area, make sure that Disc Label is selected.
3 In the Step 2: Edit area:
a Click Text to display the Edit Text window. Enter text for the title and
subtitle.
b Click New to display the Track window. Enter text to identify the first track
or file (you can optionally enter artist and date, or length), and then
click OK.
c Repeat the previous step for each track or file on the disc.
d Click the left or right arrows next to Layout, Background, and Font to
select design elements for the disc. The selections you make are previewed
in the disc window.
4 When you are satisfied with the appearance of your label, insert the
LightScribe media disc (label side down) into the disc drive tray, and then
click Print.
NOTE: LightScribe creates a grayscale (monochrome) image similar to a
black-and-white photograph.
5 From the Disc Label menu, select LightScribe 12cm disc.
6 Click OK to begin burning the label.
The estimated time to complete the label displays, along with a progress bar to
show you the time remaining. You can continue to work on your PC while
LightScribe is burning the label.