Lightscribe Requirements; Burning A Lightscribe Label With Sonic Express Labeler; Burning A Lightscribe Label After Burning With Itunes - HP Media Center m7200 - Desktop PC Software Manual

n
You can open Express
Labeler from within
DigitalMedia Plus by
clicking Tools, and
then Label Disc.
n
LightScribe creates
a grayscale
(monochrome) image
similar to a black-
and-white
photograph.
74
Microsoft Windows XP Media Center Edition 2005 Software Guide

LightScribe requirements

Burning a label with LightScribe requires three
things:
LightScribe-enabled DVD drive (select
■
models only)

Burning a LightScribe label with Sonic Express Labeler

1
Click Start, All Programs, Sonic, and then
click Express Labeler.
2
In the Step1: Select Project area, make sure
that Disc Label is selected.
3
In the Step 2: Edit area:
a
Click Disc Titles to display the Edit Disc
Title window. Enter text for the title and
subtitle.
b
Click Tracks to display the Edit Track
window. Click New to display the Track
window. Enter text to identify the first track
or file (you can optionally enter artist and
date, or length), and then click OK.
c
Repeat the previous step for each track or
file on the disc.

Burning a LightScribe label after burning with iTunes

iTunes works with Sonic Express Labeler to allow
you to burn labels on a LightScribe audio CD. The
playlist you create in iTunes to burn a disc is
automatically imported into Express Labeler so that
this information is available for you to use on your
LightScribe label. To use Express Labeler from
iTunes, the music tracks in the playlist you are using
must fit on a single CD.
1
Click Start, All Programs, iTunes, and
then click iTunes again.
Labeling software that supports LightScribe
■
LightScribe discs (sold separately)
■
d
Click the left or right arrows next to
Layout and Background to select
design elements for the disc. The selections
you make are previewed in the disc
window.
4
When you are satisfied with the appearance
of your label, insert the LightScribe media disc
(label side down) into the disc drive tray, and
then click Print.
5
From the Disc Label menu, select LightScribe
12cm disc.
6
Click OK to begin burning the label.
The estimated time to complete the label displays,
along with a progress bar to show you the time
remaining. You can continue to work on your
HP Media Center PC while LightScribe is burning
the label.
2
Burn an audio CD with iTunes. When the
burning process is complete, click Yes on the
Create LightScribe Label window.
3
In the Step 1: Select Project area, make sure
that Disc Label is selected.