Lightscribe Requirements; Burning A Lightscribe Label With Sonic Express Labeler - HP Pavilion w5100 - Desktop PC Getting Started Manual

10
Creating Data, Audio, and Video Discs on your PC

LightScribe requirements

Burning a label with LightScribe requires three things:
• LightScribe-enabled DVD drive (select models only).
• Labeling software that supports LightScribe.
• LightScribe discs (sold separately).
Burning a LightScribe label with
Sonic Express Labeler
1 Click Start, All Programs, Sonic, and then click Express Labeler.
NOTE: You can open Express Labeler from within DigitalMedia Plus by clicking
Tools, and then Label Disc.
2 In the Step 1: Select Project area, make sure that Disc Label is selected.
3 In the Step 2: Edit area:
a Click Disc Titles to display the Edit Disc Title window. Enter text for the title
and subtitle, and then click OK.
b Click Tracks to display the Edit Tracks window. Click New to display the
Track window. Enter text to identify the first track or file (you can optionally
enter artist and date, or length), and then click OK.
c Repeat the previous step for each track or file on the disc.
d Click the left or right arrows next to Layout and Background to select
design elements for the disc. The selections you make are previewed in the
disc window.
4 When you are satisfied with the appearance of your label, insert the
LightScribe media disc (label side down) into the disc drive tray, and then
click Print.
NOTE: LightScribe creates a grayscale (monochrome) image similar to a
black-and-white photograph.
5 From the Disc Label menu, select LightScribe 12cm disc.
6 Click OK to begin burning the label.
The estimated time to complete the label displays, along with a progress bar to
show you the time remaining. You can continue to work on your PC while
LightScribe is burning the label.