Step 12 - Install Accessories - Bryant 551J Installation Instructions Manual

Step 12 — Install Accessories
Available accessories include:
Curb
Thru- - base connection kit (must be installed before unit
is set on curb)
Electric heaters and single- - poing connection kits
Manual outside air damper
Two- - Position motorized outside air damper
EconoMi$er IV (with control)
EconoMi$er2 (without control/for external signal)
Power Exhaust
Differential dry- - bulb sensor (EconoMi$er IV)
Outdoor enthalpy sensor
Differential enthalpy sensor
CO sensor
2
j
Smoke detector (Return Air and/or Supply Air)
Louvered hail guard
Hood- - type hail guard
Phase monitor control
Refer to separate installation instructions for information
on installing these accessories.
Pre- - Start and Start- - Up
This completes the mechanical installation of the unit.
Refer to the unit's Service Manual for detailed Pre- - Start
and Start- - Up instructions.
Copyright 2010 Bryant Heating & Cooling Sysemts D 7310 W. Morris St. D Indianapolis, IN 46231
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
—
Printed in U.S.A. Edition Date: 01/10
36
Catalog No: II551J---02
Replaces: New